7–13
Step 5: Ending a call
1. User can choose to terminate the call by pressing Bluetooth button 1 for less than 2 seconds, the audio output system will resume
immediately after ending a call. Consequently, the communication mode is change to Standby mode.
Step 6: Reject incoming call
1. Press the Bluetooth button 1 for more than 2 seconds to reject an incoming call.
Reset Bluetooth
1. Press the Bluetooth button 1 to switch to “BT RESET” item.
2. Press the Bluetooth button 1 more than 2 seconds to confirmation for bluetooth reset.
3. All the previously paired device information will be deleted and bluetooth stack will be re-initialized.
Bluetooth Music
The Audio System will not switch to BT Music mode automatically, user has to manually select the mode.
Track Select Button ( / ) - 2
- Press “ ” button 2 to forward to the next track.
- Press “ ” button 2 to backward to the previous track.
- Press “ ” button 2 more than 2 seconds to fast forward the track.
- Press “ ” button 2 more than 2 seconds to fast backward the track.
Mute Button (MUTE) - 5
- Press the MUTE button 5 more than 2 seconds to pause play.
- To resume USB play, press the MUTE button 5 more than 2 seconds again.
Sect 07_EN D42L.indd 13 25/10/2019 11:45 AM
To Next Page
Loading...
