Installation and commissioning
21
8.03 Switching the machine on/off
● To switch on the machine, turn the main switch to the "I" position, see Chapter 7.02 Main
switch.
● After the boot operation of the control unit, call up the "basic position" function.
● To switch off the machine, call up the input function.
● Call up the "pause" function and wait until the blast air switches off automatically.
Danger of damage to the heating cartridge!
The hot air temperature must not exceed 100°C when switched off!
Before switching off the compressed air system, wait until the blast air swit-
ches off automatically!
● Turn the main switch to the "0" position, see Chapter 7.02 Main switch.
To Next Page
Loading...
