Preparation
26
9.03 Selecting the production type
The program selection function is used to choose between the types of production
- Manual heat sealing (Chapter 10.02)
- Programmed heat sealing with individual programs (Chapter 10.05)
- Programmed heat sealing with sequences (Chapters 10.07) and
- Dynamic sealing (see Chapter 10.03).
The types of production listed above, particularly their functions, are explained
in more detail in Chapter 10 Heat sealing.
● Switch on the machine.
● Call up program selection.
● Call up manual heat sealing, the production type, "Manual Heat Sealing" is activated.
or
● Select the desired program number.
(Selection can also be made by entering the program number on the fi gure panel directly.)
● Confi rm selection and quit selection menu, die production type "Programmed Heat
Sealing with individual program" is activated.
or
● Call up sequence selection.
2x
To Next Page
Loading...
Need help?
General
