Pfaff 8330

Heat sealing
42
10.04.03 Sealing parameters
● Enter sealing parameters for each zone as described in Chapter 9.04 Entering sealing
parameters (manual heat sealing).
Description of the functions
Heat sealing temperature
This function is used to alter the heat sealing temperature, see Chapter 9.04.01 Entering
the sealing temperature.
Feed stroke (sealing speed)
This function is used to open the menu for entering the feed stroke difference, the brake and
acceleration profi les and the start delay for the feed rollers, see Chapter 9.04.02 Entering
the sealing speed.
Nozzle type / hot air volume
This function is used to open the menu for choosing the nozzle type and the hot air volume,
see Chapter 9.04.03 Choice of the nozzle type and hot air volume …
Roller pressure
This function is used to alter the roller pressure, see Chapter 9.04.04 Entering the roller
pressure.