Heat sealing
52
10.06 Creating/processing sequences
In sequences up to 8 heat sealing programs are combined in any order whatever and
fi led under a sequence number. A total of up to 10 sequence programs can be fi led in the
machine’s memory.
● To enter sequence programming, fi rst of all call up the Program selection function.
● Call up the Sequence selection function and select the desired sequence number.
● Call up sequence programming.
The cursor in the window shows which program is being deleted or at which point a
new program is being inserted.
Description of the functions
Arrow keys
These functions are used to move the cursor.
Insert
This function inserts or adds a program to the sequence at the place marked.
Delete
This function deletes the marked program from the sequence.
Conclude programming
This function concludes the sequence programming.
To Next Page
Loading...
