Pfaff 8330

Adjustment
78
13.07 Tape cutting device
13
.07.01 Knife
Requirement
Knife 2 should move easily and cut reliably.
● Remove cover 1.
● Remove loose knife 2 (screws 3) and counter knife 4 (screws 5).
● Screw on new knife.
● Adjust the knife pressure (screw 6) and cutting angle (screws 7) in accordance with the
requirement.
● Carry out a cutting test.
● Screw on cover 1.
Fig. 13 - 07
1
2
3
4
5
6
7
7
5
3