Adjustment
88
13.10.03 Further parameters
Via the machine confi guration the machine control unit receives the necessary information
about attached components. If the machine components are altered, it is always necessary
to make sure that the appropriate adjustment is made in the machine confi guration.
● Switch on the machine and call up the input mode.
● Call up the service menu.
● Call up the menu for entering the machine confi guration.
● Call up the menu for entering further parameters.
● Call up the “Parameter” function.
● Select or alter the parameters and values with the appropriate arrow keys.
● Conclude the parameter input.
To Next Page
Loading...
