Adjustment
90
13.11 Description of the error numbers
13
.11.01 General errors
Display Description
ERROR: 3 Error in allocation EMS memory
ERROR: 4 C167 not reacting
ERROR: 5 Boot fi le (c167boot.bin) cannot be opened
ERROR: 6 Error in fl ash-programming
ERROR: 7 Error when opening a fi le
ERROR: 8 Battery
ERROR: 9 Firmware version confl ict
ERROR:
OPERATING DATA CHECK SUM
(CARRY OUT COLD START)
Operating data check sum
NEW OPERATING SOFTWARE
(CARRY OUT COLD START)
New operating software
COLD START CARRIED OUT Cold start
ERROR: 101 C167-error
ERROR: 106 Error compressed air
ERROR: 107 Error air volume(when air volume sensor is acti-
vated)
ERROR: 110 #Error no. motor Error DC-motor 1
ERROR: 120 #Error no. motor Error DC-motor 2
ERROR: 130 #Error no. motor Error DC-motor 3
ERROR: 140 #Error no. Temp. con-
trol
Error temperature control
ERROR: 201 Res. speed for man. sealing outside permissible
range
ERROR: 203 Tape not in basic position (resp. not cut)
ERROR: 301 Program too large
ERROR: 302 Contradiction between progpar and progload
ERROR: 303 Flash read error or progr. defect
ERROR: 304 Memory overfl ow
ERROR: 305 Invalid confi guration
ERROR: 310 File not on source
ERROR: 311 Source reading error, fi le cannot be opened
ERROR: 312 Target write error, fi le cannot be opened
ERROR: 313 Source reading error
ERROR: 314 Target write error
ERROR: 315 File confi g cannot be opened
ERROR: 316 Error when opening MDAT-fi le
ERROR: 317 Write error in MDAT-fi le
ERROR: 318 Machine data identifi cation incorrect
ERROR: 319 Read error in MDAT-fi le
To Next Page
Loading...
Need help?
General
