Input
55
11 Input
Contained in the input menu are the functions for displaying information, for program ma-
nagement, for machine adjustment and confi guration (incl. choice of country and access
rights), as well as for supporting service and adjustment work.
11 .01 Summary of the functions in the input menu
● Switch on the machine.
● Call up the input menu.
Description of the functions
Heat sealing mode
This function is used to change to the heat sealing mode.
Info
This function opens a menu to display the following information:
- Current software status of the machine
- Current fi rmware status of the machine
- Current fi rmware status of the control panel
- Length of sealing tape already used (can be reset with the „clear“ function).
- Number of operating hours (can be reset with the Clear function)
- Number of production hours (can be reset with the Clear function)
Program management
This function is used to manage the data from the machine memory and disks, see Chapter
11 .02 Program management.
Further settings
This function is used to call up a menu with further machine settings, the choice of country
and the access rights, see Chapter 11 .04 Further settings.
Servicemenu
This function is used to call up the menu for selecting various service functions, see Chapter
13.10 Service menu.
To Next Page
Loading...
Need help?
General
