Preparation
31
Description of further functions
Clear
When this function key is pressed, the value is set at "0".
Arrow keys
When these function keys are pressed, the value is increased or reduced.
Esc
When this function key is pressed, the input is cancelled without the value entered being
taken over
Further parameter
This function key opens a menu for entering the brake and acceleration profi le and for set-
ting the start delay.
9.04.03 Choice of the nozzle type and hot air volume
● Increase or reduce the hot air volume directly.
or
● Call up the menu for selecting the nozzle type or for entering the hot air volume.
● Select the nozzle type in accordance with the width of the nozzle installed.
The symbol for the selected nozzle type appears as an inverse symbol.
Düsentyp Breite der Düse
1
< 10 mm
2
10 - 30 mm
3
> 30 mm
To Next Page
Loading...
Need help?
General
