Heat sealing
38
Roller pressure
These functions are used to alter the roller pressure, see Chapter 9.04.04 Entering the rol-
ler pressure.
Feed roller up/down
With this function the top feed roller, depending on its position, can be raised or lowered,
analog to the pedal functions "-1" and "+1", also see Chapter 7.03 Pedal.
Feed rollers in reverse
This function makes it possible to call up the reverse running function of the feed rollers.
Tape cutting
This function starts a tape cutting operation.
Input menu
This function is used to call up the Input Menu, see Chapter 11 Input.
To Next Page
Loading...
Need help?
General
