Planet IGS-10020HPT-U - VLAN Setting Example; Two Separate 802.1 Q Vlans

User’s Manual of IGS-10020HPT-U
146
4.3.3.8 VLAN setting example:
 Separate VLAN
 802.1Q VLAN Trunk
 Port Isolate
4.3.3.8.1 Two Separate 802.1Q VLANs
The diagram shows how the Industrial Managed PoE+ Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN
Group 2 and VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive
traffic from the same VLAN members. The screen in Figure 4-3-3-7 appears and Table 4-3-3-8 describes the port configuration
of the Industrial Managed PoE+ Switches.
Figure 4-3-3-7: Two Separate VLANs Diagram
VLAN Group VID Untagged Members Tagged Members
VLAN Group 1 1 Port-7 ~ Port-52 N/A
VLAN Group 2 2 Port-1,Port-2 Port-3
VLAN Group 3 3 Port-4,Port-5 Port-6
Table 4-1: VLAN and Port Configuration