Planet IGS-10020HPT-U - Product Specifications

User’s Manual of IGS-10020HPT-U
20
1.5 Product Specifications
Product
IGS
-10020HPT-U
Hardware Specifications
Version 1
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 100/1000/2500BASE-X mini-GBIC SFP ports (Port 9 and Port 10)
Console 1 x USB serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V
DI/DO
2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24V DC, 100mA max.
Dimensions (W x D x H) 76.8 x 107x 152 mm
Weight
1
085g
Power Requirements
DC 12
-54V
Power Consumption
250 watts/853BTU
(Full loading with PoE function)
ESD Protection 6KV DC
EFT Protection 6KV DC
LED Indicator
System:
Power 1
(Green)
Power 2
(Green)
Fault Alarm
(Red)
Ring
(Green)
R.O. (Ring Owner)
(Green)
Per 10/100/1000T RJ45 Ports:
PoE
-in-Use (Amber)
LNK/ACT
(Green)
Per 100/1000
/2500BASE-X SFP Interface:
LNK/ACT
(Green)
1G/2.5G (Amber)
Switching Specifications
Switch Architecture Store-and-Forward
Switch Fabric 26Gbps/non-blocking
Throughput (packet per
second)
19.34Mpps@ 64Bytes packet