User’s Manual of IGS-10020HPT-U
51
4.2 System
Use the System menu items to display and configure basic administrative details of the Industrial Managed PoE+ Switch.
Under the System, the following topics are provided to configure and view the system information. This section has the following
items:
■ System Information
The Industrial Managed PoE+ Switch
system information is provided here.
■ IP Configuration Configure the IPv4/IPv6 interface and IP routes of the
Industrial Managed
PoE+ Switch on this page.
■ IP Status
This page displays the status of the IP protocol layer. The status is defined
by the IP interfaces, the IP routes and the neighbor cache (ARP cache)
status.
■ ARP This table provide ARP Table Configuration and status display.
■ Users Configuration
This p
age provides an overview of the current users. Currently the only way
to login as another user on the web server is to close and reopen the
browser.
■ Privilege Levels
This page provides an overview of the privilege levels.
■ NTP Configuration Configure NTP server on this page.
■ Time Configuration Configure time parameter on this page.
■ UPnP Configure UPnP on this page.
■ DHCP Relay Configure DHCP Relay on this page.
■ DHCP Relay Statistics This page provides statistics for DHCP relay.
■ CPU Load This page displays the CPU load, using an SVG graph.
■ System Log The system log information of the Industrial Managed PoE+ Switch
■ Detailed Log The detailed log information of the Industrial Managed PoE+ Switch
■ Remote Syslog Configure remote syslog on this page.
■ SMTP Configuration
■
Configure SMTP parameters on this page.
Congiguration fault alarm on this page.
■ Digital Input/Output Configuration digital input and output on this page.
■ SNMP Configure SNMP parameters on this page
■ RMON Configure the RMON parameters on this page
■ DHCP server
Configure the DHCP server on this page
■ Industrial Protocol
■ Remote Management
Configure the Modbus TCP Mode on this page
Configure NMS controller and CloudViewer Server
To Next Page
Loading...
