User’s Manual of IGS-10020HPT-U
64
4.2.1.7.1 System Time Correction Manually
Configure NTP on this page. NTP is an acronym for Network Time Protocol, a network protocol for synchronizing the clocks of
computer systems. NTP uses UDP (data grams) as transport layer. You can specify NTP Servers. The NTP Configuration
screen in Figure 4-2-10 appears.
Figure 4-2-10: System time correction Manually Page Screenshot
The page includes the following fields:
Object Description
• User Manually
Indicates the NTP mode as manual operation. Possible modes are:
Enabled: Enable NTP manual mode operation. When enabling NTP user
manually mode operation, the system time will follow the date setting.
Disabled: Disable NTP user manual mode operation.
• Date
If enable the user manually , Switch can set the Year / Mouth / Day/ Hour / Minute
/ Second in this page
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
