User’s Manual of IGS-10020HPT-U
182
4.3.7.2 Profile Table
This page provides IPMC Profile related configurations. The IPMC profile is used to deploy the access control
on IP multicast streams. It is allowed to create at maximum 64 Profiles with at maximum 128 corresponding
rules for each. The Profile Table screen in Figure 4-3-7-5 appears.
Figure 4-3-7-5: IPMC Profile Configuration Page
The page includes the following fields:
Object Description
• Global Profile Mode
Enable/Disable the Global IPMC Profile.
System starts to do filtering based on profile settings only when the global profile mode is enabled.
• Delete
Check to delete the entry.
The designated entry will be deleted during the next save.
• Profile Name
The name used for indexing the profile table.
Each entry has the unique name which is composed of at maximum 16 alphabetic and numeric
characters. At least one alphabet must be present.
• Profile Description
Additional description, which is composed of at maximum 64 alphabetic and numeric characters,
about the profile.
No blank or space characters are permitted as part of description. Use "_" or "-" to separate the
description sentence.
• Rule
When the profile is created, click the edit button to enter the rule setting page of the designated
profile. Summary about the designated profile will be shown by clicking the view button. You can
manage or inspect the rules of the designated profile by using the following buttons:
: List the rules associated with the designated profile.
: Adjust the rules associated with the designated profile.
Buttons
: Click to add new IPMC profile. Specify the name and configure the new entry. Click "Save”.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
