User’s Manual of IGS-10020HPT-U
350
4.6.1.8 PoE Alive Check Configuration
The Industrial Managed PoE+ Switch can be configured to monitor connected PD’s status in real-time via ping action. Once the
PD stops working and without response, Industrial Managed PoE+ Switch is going to restart PoE port port power, and bring the
PD back to work. It will greatly enhance the reliability and reduces administrator management burden.
This page provides you how to configure PD Alive Check.The screen in Figure 4-6-1-7 appears.
Figure 4-6-1-7: PD Alive Check Configuration Screenshot
To Next Page
Loading...
