User’s Manual of IGS-10020HPT-U
76
4.2.1.16 SMTP Configuration
This page facilitates an SMTP Configuration on the switch. The SMTP Configure screen in Figure 4-2-19 appears.
Figure 4-2-19: SMTP Configuration Page Screenshot
The page includes the following fields:
Object Description
• SMTP Mode
Controls whether SMTP is enabled on this switch.
• SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
• SMTP Port
Set port number of SMTP service.
• SMTP Authentication
Controls whether SMTP authentication is enabled if authentication is required
when an e-mail is sent.
• Authentication User
Type the user name for the SMTP server if Authentication is Enabled.
• Authentication
Type the password for the SMTP server if Authentication is Enabled.
• E-mail From
Type the sender’s e-mail address. This address is used for reply e-mails.
• E-mail Subject
Type the subject/title of the e-mail.
• E-mail 1 To
Type the receiver’s e-mail address.
• E-mail 2 To
Buttons
: Send a test mail to mail server to check whether this account is available or not.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General