Planet IGS-10020HPT-U - Installing the SFP Transceiver

User’s Manual of IGS-10020HPT-U
36
2.3.1 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Industrial
Managed PoE+ Switch as Figure 2-8 appears.
Figure 2-8 : Plugging in the SFP Transceiver
 Approved PLANET SFP Transceivers
PLANET Industrial Managed PoE+ Switch supports both single mode and multi-mode SFP transceivers. The following
list of approved PLANET SFP transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model Speed
(Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi-Mode 2km 1310nm
0 ~ 60℃
MFB-F20 100 LC Single Mode 20km 1310nm
0 ~ 60℃
MFB-F40 100 LC Single Mode 40km 1310nm
0 ~ 60℃
MFB-F60 100 LC Single Mode 60km 1310nm
0 ~ 60℃
MFB-F120 100 LC Single Mode 120km 1550nm
0 ~ 60℃
MFB-TFX 100 LC Multi-Mode 2km 1310nm
-40 ~ 85℃
MFB-TF20 100 LC Single Mode 20km 1310nm
-40 ~ 85℃
Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP)
Model DDM
Speed
(Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (TX)
Wavelength (RX)
Operating Temp.
MFB-FA20 --- 100 WDM (LC) Single Mode 20km 1310nm 1550nm
0 ~ 60℃
MFB-FB20 --- 100 WDM (LC) Single Mode 20km 1550nm 1310nm
0 ~ 60℃
MFB-TFA20 --- 100 WDM (LC) Single Mode 20km 1310nm 1550nm
-40~85℃
MFB-TFB20 --- 100 WDM (LC) Single Mode 20km 1550nm 1310nm
-40~85℃