User’s Manual of IGS-10020HPT-U
16
1.4 Product Features
Physical Port
8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
One USB console interface for basic management and setup
Power over Ethernet
Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
Up to 8 IEEE 802.3af/802.3at devices powered
Supports PoE power up to 36 watts for each PoE port
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m in standard mode and 200m in extend mode
PoE management features
• PoE admin-mode control
• PoE management mode selection
• Per port PoE function enable/disable
• PoE port power feeding priority
• Per PoE port power limit
• PoE Port Status monitoring
• PD classification detection
• Sequence port PoE
Intelligent PoE features
• PoE Legacy mode enable/disable
• Temperature threshold control
• PoE usage threshold control
• PoE schedule
• PD alive check
• LLDP PoE Neighbors
Industrial Protocol
Modbus TCP for real-time monitoring in a SCADA system
IEEE 1588v2 PTP (Precision Time Protocol)
Industrial Case and Installation
IP30 aluminum case
DIN rail and wall-mount designs
DC 12-54V, redundant power with reverse polarity protection
Supports 6000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature
E-Mark certification
To Next Page
Loading...
Need help?
General