Planet IGS-10020HPT-U - SNMP Trap Source Configuration

User’s Manual of IGS-10020HPT-U
85
4.2.2.5 SNMP Trap Source Configuration
This page provides SNMP trap source configurations. A trap is sent for the given trap source if at least one filter with filter type
included matches the filter, and no filters with filter type excluded matches.
Figure 4-2-2-5: SNMP Trap Source Configuration Page Screenshot
Click “Add New Entry” to add a new entry. The maximum entry count is 32.
Figure 4-2-2-6: SNMP Trap Source Configuration Page Screenshot
The page includes the following fields:
Object Description
• Name
Indicates the name for the entry.
• Type
The filter type for the entry. Possible types are:
■ included: An optional flag to indicate a trap is sent for the given trap source is matched.
■ excluded: An optional flag to indicate a trap is not sent for the given trap source is matched.
• Subset OID
The subset OID for the entry.
The value should depend on the what kind of trap name.
For example, the ifIdex is the subset OID of linkUp and linkDown. A valid subset OID is one or
more digital number(0-4294967295) or asterisk(*) which are separated by dots(.). The first
character must not begin with asterisk(*) and the maximum of OID count must not exceed 128.
Buttons
: Click to add a new community entry. The maximum entry count is 32
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.