Planet IGS-10020HPT-U - Page 21

User’s Manual of IGS-10020HPT-U
21
Address Table 8K entries, automatic source address learning and aging
Shared Data Buffer 4Mbits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
Power Over Ethernet
PoE Standard
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type
End-span
PoE Power Output
Per port 52V/54V DC, 350mA; max. 15.4 watts (IEEE 802.3af)
Per port 52V.54V DC, 590mA; max. 36 watts (IEEE 802.3at)
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
60W maximum (DC 12V power input)
120W maximum (DC 24V power input)
240W maximum (DC 54V power input)
Max. Number of Class 2 PDs
@ 7 watts
8
Max. Number of Class 3 PDs
@ 15.4 watts
8
Max. Number of Class 4 PDs
@ 30.8 watts
8
PoE Extend Mode
Remote power feeding up to 100m in standard mode and 200m in extend mode
Layer 2 Function
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port Mirroring
TX/RX/both
1 to 1 monitor
VLAN
802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
GVRP
MVR (Multicast VLAN Registration)
Up to 4K VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/static trunk
Supports 5 trunk groups with 10 ports per trunk group
QoS
Traffic classification based, strict priority and WRR