User’s Manual of IGS-10020HPT-U
26
IGS-10020HPT-U
Figure 2-2: 10020HPT-U Reset Button
Reset Button Pressed and Released
< 5 sec: System Reboot Reboot the Industrial Managed PoE+ Switch.
> 5 sec: Factory Default
Reset the Industrial Managed PoE+ Switch
configuration. The Industrial Managed PoE+ Switch will then
reboot and load the default settings as shown below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。
Default Gateway: 192.168.0.254