User’s Manual of IXT-900 PoE series
17
Management
IPv4 and IPv6 dual stack management
Supports Link Fault Pass-through
Supports Link Fault PoE Pass-through
Management Interfaces
− Web HTTP/HTTPS management
− Telnet Command Line Interface
− SNMPv1, v2c, v3 monitoring
− SSHv2, TLSv1.2
System Maintenance
− Firmware upload/download via HTTP
− Reset button for system reboot or reset to factory default.
− Dual images
Simple Network Time Protocol (SNTP)
User privilege levels control
SNMP Management
− SNMP trap for interface link up and link down notification.
− Four RMON groups (history, statistics, alarms, and events)
Network Diagnostic
− SFP-DDM (Digital Diagnostic Monitor)
Syslog remote alarm
Local system Log
ICMPv6 / ICMPv4 remote ping
PLANET Smart Discovery Utility for convenient deployment
PLANET Remote Management
− PLANET NMS Controller and CloudViewerPro app for central management
Security
IP address access management to prevent unauthorized intruder.
Static MAC setting and MAC Filtering
Protected ports
Case and Installation
Dual 12~54VDC external power supply
-40 to 75°C operating temperature
Supports 4KVDC Contact / 8KVDC Air Ethernet ESD protection.
Wall-mount and DIN-rail installation