Planet IXT-900-1X1UP - Switching

User’s Manual of IXT-900 PoE series
89
4.3 Switching
Use the Port Menu to display or configure the Managed Media Converter's ports. This section has the following items:
4.3.1 Port Management
■ Port Configuration
Configures port configuration settings.
■ Port Counters
Lists Ethernet and RMON port statistics.
■ Link Fault Passthrough
Link fault detection and propagation
■ Jumbo Frame
Sets the jumbo frame on the media converter.
■ Protected Port
Configures protected ports settings.
■ EEE
Configures EEE settings.
■ SFP Module Status
Displays SFP module information.
■ SFP Module Detail Status
Displays SFP module information.
4.3.2 VLAN
■ Management VLAN
Configures the management VLAN.
■ Create VLAN
Creates the VLAN group.
■ Interface Settings
Configures mode and PVID on the VLAN port.
■ Port to VLAN
Configures the VLAN membership.
■ Port VLAN Membership
Display the VLAN membership.
4.3.3 LLDP
■ LLDP Global Setting
Configure LLDP global settings on this page.
■ LLDP Port Setting
Configure LLDP port settings on this page.
■ LLDP Local Device
Configure LLDP local device settings on this page.
■ LLDP Remote Device
Configure LLDP remote device settings on this page.
■ LLDP Statistics
Provide LLDP statistics on this page.
4.3.4 MAC Address Table
■ Dynamic Learned
Provide dynamic learned information of whole Ethernet interfaces on
this page.
■ Dynamic Address Setting
Provide aging time setting on this page.
■ Static MAC Setting
Provide static MAC address setting on this page.
■ MAC Filtering
Provide MAC address filtering setting on this page.