Planet IXT-900-1X1UP - Snmpv1, 2 Notification Recipients

User’s Manual of IXT-900 PoE series
72
4.2.4.7 SNMPv1, 2 Notification Recipients
Configure SNMPv1 and 2 notification recipients on this page. The SNMPv1, 2 Notification Recipients screens in Figure 4-2-31
and Figure 4-2-32 appear.
Figure 4-2-31 SNMPv1, 2 Notification Recipients Screenshot
The page includes the following fields:
Object
Description
 Server Address
Indicates the SNMP trap destination address. It allows a valid IP address in
dotted decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4
address. For example, '::192.1.2.34'.
 SNMP Version
Indicates the SNMP trap supported version. Possible versions are:
 SNMP v1: Set SNMP trap supported version 1.
 SNMP v2c: Set SNMP trap supported version 2c.
 Notify Type
Set the notify type in traps or informs.
 Community Name
Indicates the community access string when send SNMP trap packet.
 UDP Port
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message
via this port, the port range is 1~65535.
 Time Out
Indicates the SNMP trap inform timeout. The allowed range is from 1 to 300.
 Retries
Indicates the SNMP trap inform retry times. The allowed range is from 1 to 255.
Buttons
: Click to add a new SNMPv1, 2 host entry.
Figure 4-2-32 SNMPv1, 2 Host Status Screenshot