User’s Manual of IXT-900 PoE series
178
4.7.5 PoE Alive Check Configuration
The IXT-900 PoE Series can be configured to monitor connected PD’s status in real-time via ping action. Once the PD stops
working and without response, the PoE Switch is going to restart PoE port power, and bring the PD back to work. It will greatly
enhance the reliability and reduces administrator management burden.
This page provides you with how to configure PD Alive Check. The screen in Figure 4-7-6 appears.
Figure 4-7-6: PD Alive Check Configuration Screenshot
To Next Page
Loading...
