Planet IXT-900-1X1UP - Page 19

User’s Manual of IXT-900 PoE series
19
Backward compatible with 802.3at PoE+ PSE
PoE Power Supply Type
802.3bt
End-span
Mid-span
Legacy
Force
Power Pin Assignment
802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
PoE Power Budget
95W
Layer 2 Function
Port Configuration
Port disable/enable
Auto-negotiation 100Mbps, 1/2.5/5/10Gbps full and half duplex mode selection
Flow control disable/enable
Port Status
Display each port’s link status, speed, Auto-negotiation status, duplex mode, flow control status
VLAN
IEEE 802.1Q tag-based VLAN
IEEE 802.1ad Q-in-Q tunneling
Up to 256 VLAN groups, out of 4096 VLAN IDs
Bandwidth Control
Per port bandwidth control
Ingress: 16~10,000,000Kbps
Egress: 16~10,000,000Kbps
QoS
Traffic classification based, strict priority and WRR
8-level priority for switching
Traffic classification:
- CoS/802.1p
- DSCP
- IP Precedence
Ring
Supports ERPS, and complies with ITU-T G.8032
Recovery time < 450ms
Security Function
Access Security
Remote management protocols support: SSH, Telnet, HTTP and HTTPs
Protected ports
System Management
Basic Management
Interfaces
Telnet, Web browser, SNMP v1, v2c
Secure Management
Interfaces
SSHv2, TLSv1.2, SNMPv3
System Management
Firmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
LLDP protocol
SNTP
PLANET Smart Discovery Utility
PLANET NMS Controller
PLANET CloudViewerPro mobile app
Event Management
Remote syslog
Local system log
SNMP trap