NOTE
If you wish to use fast forward buttons on this view, select Settings >
Program > 2200 Program Features > 2240 General > Fast Forward ON.
Using a fast forward button takes you directly to the screen where you can
take an exposure.
Program group button(s)
To view all the programs that are available for a program group, select the
2D Dental program group button.
Making selections
To make a selection on the touch screen, simply touch a button or a field
with your finger or a soft stylus. The selected option is highlighted. To
deselect an option, touch the button or field again (or select another option if
available).
You hear an audible signal when you make a selection. If you wish to adjust
the volume of the signal, select Settings > User > 1300 Operational Settings
> 1320 Audio Settings > Touch Volume.
NOTE
Do not use sharp objects to operate the touch screen.
Accept button
To accept a selection, select the green check mark button.
Cancel button
To cancel a selection and close the screen, select the red cross button.
Pause button
To pause a function (instead of cancelling it), select the pause button.
Moving forward
3 Main parts
User's manual Planmeca ProMax 15
To Next Page