Polycom CX5100 - Page 53

Configuration Parameters
Polycom, Inc. 53
device.sec.TLS.customDeviceCert1.publicCert
device.sec.TLS.customDeviceCert2.publicCert
Enter the
signed
custom
device
certificate in
PEM format
(X.509)
device.sec.TLS.customDeviceCert1.privateKey
device.sec.TLS.customDeviceCert2.privateKey
Enter the
correspondin
g signed
private key in
PEM format
(X.509)
device.sec.TLS.customDeviceCert1.set
device.sec.TLS.customDeviceCert2.set
0 or 1 0
Note that you use a single .set parameter to enable or disable only these two related <device/> parameters -
device.sec.TLS.customDeviceCertX.publicCert and
device.sec.TLS.customDeviceCertX.privateKey. All other <device/> parameters have their own
corresponding .set parameter that enables or disables that parameter.
Size constraints are: 4096 bytes for the private key, 8192 bytes for the device certificate.
device.sec.TLS.profile.caCertList1 (TLS Platform Profile 1)
device.sec.TLS.profile.caCertList2 (TLS Platform Profile 2)
Builtin,
BuiltinAndPla
tform1,
BuiltinAndPla
tform2, All,
Platform1,
Platform2,
Platform1And
Platform2
Choose the CA certificate(s) to use for TLS Platform Profile 1 and TLS Platform Profile 2 authentication:
The built-in default certificate
The built-in and Custom #1 certificates
The built-in and Custom #2 certificates
Any certificate (built in, Custom #1 or Custom #2)
Only the Custom #1 certificate
Only the Custom #2 certificate
Either the Custom #1 or Custom #2 certificate
device.sec.TLS.profile.cipherSuite1 (TLS Platform Profile 1)
device.sec.TLS.profile.cipherSuite2 (TLS Platform Profile 2)
string
The cipher suites to use for TLS Platform Profile 1 and TLS Platform Profile 2)
Device Parameters (continued)
Parameter Permitted
Values
Default