Configuration Parameters
Polycom, Inc. 54
device.sec.TLS.profile.cipherSuiteDefault1 (TLS Platform
Profile 1)
device.sec.TLS.profile.cipherSuiteDefault2 (TLS Platform
Profile 2)
0 or 1
The cipher suite to use for TLS Platform Profile 1 and TLS Platform profile 2. If set to 0, the custom cipher suite is
used. If set to 1, the default cipher suite is used.
device.sec.TLS.profile.deviceCert1 (TLS Platform Profile 1)
device.sec.TLS.profile.deviceCert2 (TLS Platform Profile 2)
Builtin,
Platform1,
Platform2
Choose the device certificate(s) for TLS Platform Profile 1 and TLS Platform Profile 2 to use for authentication.
device.sec.TLS.profile.profileSelection.dot1x PlatformProfil
e1,
PlatformProfil
e2
Choose the TLS Platform Profile to use for 802.1X, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.provisioning
1
PlatformProfil
e1,
PlatformProfil
e2
The TLS Platform Profile to use for provisioning, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.syslog
1
PlatformProfil
e1,
PlatformProfil
e2
The TLS Platform Profile to use for syslog, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.prov.strictCertCommonNameValidation 0 or 1 1
If set to 1, provisioning always verifies the server certificate for commonName/SubjectAltName match with the server
hostname that the system is trying to connect.
device.sec.TLS.syslog.strictCertCommonNameValidation 0 or 1 1
If set to 1, syslog always verifies the server certificate for commonName/SubjectAltName match with the server
hostname that the system is trying to connect.
device.sntp.gmtOffset -43200 to
46800
The GMT offset—in seconds—to use for daylight savings time, corresponding to -12 to +13 hours.
device.sntp.serverName IP address or
domain name
string
Device Parameters (continued)
Parameter Permitted
Values
Default