Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 103
Example Call Park and Retrieve Configuration
The configuration parameters for the call park and retrieve feature are located in two template files. You
can enable the feature using the features.cfg template file and configure the feature using the sip-
interop.cfg file.
In the following configuration example, the call park feature has been enabled in the features.cfg
template file.
You can configure the call park and call retrieve feature using parameters located in the sip-interop.cfg
template file. The following illustration shows that the parked call retrieve method has been set to
native, meaning that the phone will use SIP INVITE with the Replaces header. The method can also be
set to legacy, meaning that the phone will use the call.parkedCallRetrieveString star code to
retrieve the parked call.
When the call park and retrieve feature is enabled, the Park soft key displays when you are in a
connected call. To park the call, press the Park soft key.

Polycom CX5500 Specifications

General

Brand	Polycom
Model	CX5500
Category	Conference System
Language	English