Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 226
Polycom signature (always 4 octets)
6f
Length of Polycom data
01 07 50 6f 6c 79 63 6f 6d
sub-option 1 (company), length, "Polycom"
02 15 53 6f 75 6e 64 50 6f 69 6e 74 49 50 2d 53 50 49 50 5f 36 30 31
sub-option 2 (part), length, "CX5500"
03 10 32 33 34 35 2d 31 31 36 30 35 2d 30 30 31 2c 32
sub-option 3 (part number), length, "2345-11605-001,2"
04 1c 53 49 50 2f 54 69 70 2e 58 58 58 58 2f 30 38 2d 4a 75 6e 2d 30 37 20 31
30 3a 34 34
sub-option 4 (Application version), length, "SIP/Tip.XXXX/08-Jun-07 10:44"
05 1d 42 52 2f 33 2e 31 2e 30 2e 58 58 58 58 2f 32 38 2d 41 70 72 2d 30 35 20
31 33 3a 33 30
sub-option 5 (BootROM version), length, "BR/3.1.0.XXXX/28-Apr-05
13:30"
ff
end of sub-options
For the Updater, sub-option 4 and sub-option 5 will contain the same string. The string is formatted as
follows:
<apptype>/<buildid>/<date+time>
where:
<apptype> can be 'BR' (BootROM) or 'SIP' (SIP Application)
Product, Model, and Part Number Mapping
You can use the master configuration file to direct phone upgrades to a software image and configuration
files based on a phone model number, a firmware part number, or a phone’s MAC address.
The part number has precedence over the model number, which has precedence over the original
version.
For example, CONFIG_FILES_2345-11560-001=”phone1_2345-11560-001.cfg, sip_2345-
11560-001.cfg” will override CONFIG_FILES_CX5500=”phone1_CX5500.cfg,
sip_CX5500.cfg”, which will override CONFIG_FILES=”phone1.cfg, sip.cfg” for the CX5500.
You can also add variables to the master configuration file that are replaced when the phone reboots. The
variables include PHONE_MODEL, PHONE_PART_NUMBER, and PHONE_MAC_ADDRESS.
Capture the Phone’s Current Screen
You can capture your phone’s current screen using a Web browser.
To Next Page
Loading...
Need help?
General
