Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 90
This example configuration will result in the following graphic display background on the phone screen.
Note that line and soft key labels will display over the background image.
Enable Automatic Off-Hook Call Placement
You can configure the system to automatically place a call to a specified number when you go off-hook.
This feature is sometimes referred to as hot dialing. The phone goes off-hook when you press the New
Call soft key. As shown in the table Enable Automatic Off-Hook Call Placement, you can specify an off-
hook call contact and enable or disable the feature for specific line registrations.
Enable Automatic Off-Hook Call Placement
Central Provisioning Server
template > parameter
Specify the contact to dial when the phone goes off-hook
reg-advanced > call.autoOffHook.x.contact
Enable or disable automatic off-hook call placement on registration
x
reg-advanced > call.autoOffHook.x.enabled

Polycom CX5500 Specifications

General

Brand	Polycom
Model	CX5500
Category	Conference System
Language	English