Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 302
<sec/>
The parameters listed in the table General Security Parameters affects the security features of the phone.
The configuration parameter is defined as follows:
General Security Parameters
If 0, the phone does not advertise its serial number (MAC address) through protocol signaling. If 1, the phone may
advertise its serial number through protocol signaling.
1
Change causes phone to restart or reboot.
This parameter also includes:
● <encryption/>
● <pwd/><length/>
● <srtp/>
● <dot1x><eapollogoff/>
●
● <hostmovedetect/>
● <TLS/>
<profile/>
<profileSelection/>
<encryption/>
The table File Encryption Parameters lists available encryption parameters.
File Encryption Parameters
sec.encryption.upload.callLists
1
The encryption on the phone-specific call lists that is uploaded to the provisioning server.
If 0, the call list is uploaded unencrypted regardless of how it was downloaded, the directory replaces whatever
phone-specific call list is on the server, even if the file on the server is encrypted.
If 1, the call list is uploaded encrypted regardless of how it was downloaded. The file replaces any existing
phone-specific call lists file on the server.