Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 75
Example Distinctive Ringing Configuration
The following illustration shows that the ring type ringer2 has been applied to incoming calls to line 1.
For a list of all parameters and their corresponding ringtones, see Ringtone Pattern Names.
Apply Distinctive Call Waiting
You can use the alert-info values and class fields in the SIP header to map calls to distinct call-waiting
types. You can apply three call waiting types: beep, ring, and silent. The table Apply Distinctive Call
Waiting shows you the parameters you can configure for this feature. This feature requires call server
support.
Apply Distinctive Call Waiting
Central Provisioning Server
Enter the string which displays in the SIP alert-info header
sip-interop.cg > voIpProt.SIP.alertInfo.x.value
Enter the ring class name
sip-interop.cfg > voIpProt.SIP.alertInfo.x.class
To Next Page
Loading...
