Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 109
This feature is one of several features associated with Flexible Call Appearances. If you want to enable
multiple line keys per registration, see Assign Multiple Line Keys Per Registration. Note that if you assign
a registered line to multiple line keys, the default number of concurrent calls will apply to all line keys. See
the following table if you want use multiple registrations on a phone, and for definitions of all features
associated with Flexible Call Appearances. Use this table to customize the number of registrations, line
keys per registration, and concurrent calls.
Enable Multiple Call Appearances
Central Provisioning Server
Set the default number of concurrent calls for all line keys
reg-basic.cfg > call.callsPerLineKey
Override the default number of calls per line key for a specific line
reg-advanced.cfg > reg.x.callsPerLineKey
Web Configuration Utility
To set the default number of concurrent calls a line key, navigate to Settings > SIP, expand Local Settings, and
edit Calls Per Line Key.
To override the number of concurrent calls for a specific line, navigate to Settings > Lines, select the line to
modify from the left pane, expand Identification, and edit Calls Per Line.
Local Phone User Interface
Assign the default number of concurrent calls per line by navigating to Settings > Advanced > Admin Settings >
Line Configuration > Calls Per Line Key (navigate to Line Configuration > Line X > Line Keys > Calls Per
Line Key to change the calls per line for only line x).
To Next Page
Loading...
Need help?
General
