Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 282
Parameter
Permitted Values
Default
prov.login.localPassword
String
123
The password used to validate the user login. It is stored either as plain text or encrypted (an SHA1 hash).
prov.login.persistent
0 or 1
0
If 0, users are logged out if the handset reboots. If 1, users remain logged in when the phone reboots.
prov.login.required
0 or 1
0
If 1, a user must log in when the login feature is enabled. If 0, the user does not have to log in.
prov.loginCredPwdFlushed.enabled
0 or 1
1
If 1, when a user logs in or logs out, the login credential password is reset. If 0, the login credential password is
not reset.
prov.polling.enabled
0 or 1
0
If 0, the provisioning server is not automatically polled for upgrades. If 1, the provisioning server is polled.
prov.polling.mode
abs, rel, random
abs
The polling mode.
abs The phone polls every day at the time specified by prov.polling.time.
rel The phone polls after the number of seconds specified by prov.polling.period.
random The phone polls at random between a starting time set in prov.polling.time and an end time set in
prov.polling.timeRandomEnd.
Note that if you set the polling period in prov.polling.period to a time greater than 86400 seconds (one
day) polling occurs on a random day within that polling period (meaning values such as 86401 would be over 2
days) and only between the start and end times. The day within the period is decided based upon the phones
mac address and will not change with a reboot whereas the time within the start and end is calculated again with
every reboot.
prov.polling.period
integer > 3600
86400
The polling period in seconds. The polling period is rounded up to the nearest number of days in absolute and
random mode. In relative mode, the polling period starts once the phone boots. In random mode, if this is set to a
time greater than 86400 (one day) polling occurs on a random day based on the phone’s MAC address.
prov.polling.time
hh:mm
03:00
The polling start time. Used in absolute and random modes.
prov.polling.timeRandomEnd
hh:mm
Null
The polling stop time. Only used in random mode.
prov.quickSetup.enabled
0 or 1
0
If 0, the quick setup feature is disabled. If 1, the quick setup feature is enabled.
prov.startupCheck.enabled
0 or 1
1
If 0, the phone is not provisioned at startup. If 1, the phone is provisioned at start up. All configuration files,
licenses, and overrides are downloaded even if the software changes. (The previous behavior was to reboot as
soon as the phone determined that software changed.)
1
Change causes phone to restart or reboot.

Polycom CX5500 Specifications

General

Field of View	360 degrees
Camera Resolution	1920 x 1080
Microphone Range	12 feet (3.6 meters)
Connectivity	USB
Audio Bandwidth	160 Hz to 22 kHz
Speaker	Built-in speaker
Compatibility	Microsoft Lync, Microsoft Skype for Business