Polycom CX5500

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 296
Sampled Audio File Number
Default Use (Pattern Reference)
8
Ringer 19 (se.pat.ringer.ringer21)
9
Ringer 20 (se.pat.ringer.ringer22)
10
Ringer 21 (se.pat.ringer.ringer23)
11
Ringer 22 (se.pat.ringer.ringer24)
12 to 24
Not Used
<se/>
The table Sound Effect Parameters lists configurable sound effect parameters. You can also configure
sound effect patterns in <pat/> and ringtones in <rt/>. The phone uses both synthesized (based on the
chord-sets, see <chord/>) and sampled audio sound effects. Sound effects are defined by patterns:
rudimentary sequences of chord-sets, silence periods, and wave files.
Sound Effect Parameters
Parameter
Permitted Values
Default
se.appLocalEnabled
1
0 or 1
1
If set to 1, local user interface sound effects such as confirmation/error tones, will be enabled.
se.destination
chassis, headset, handset, active
1
The transducer or audio device that plays sound effects and alerts. Choose from the chassis (speakerphone),
headset (if connected), handset, or the active destination. If active, alerts will play from the destination
that is currently in use. For example, if you are in a call on the handset, a new incoming call will ring on the
handset.
se.stutterOnVoiceMail
0 or 1
1
If set to 1, a stuttered dial tone is used in place of a normal dial tone to indicate that one or more voicemail
messages are waiting at the message center.