Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 42
Name
Possible Values
Server Type
None=0, UDP=1, TCP=2, TLS=3
The protocol that the phone will use to write to the syslog server. If set to None (or 0), transmission is turned off,
but the server address is preserved.
Facility
0 to 23
A description of what generated the log message. For more information, see section 4.1.1 of RFC 3164.
The default value is 16, which maps to local 0.
Render Level
0 to 6
Specifies the lowest class of event that will be rendered to syslog. It is based on log.render.level and can
be a lower value. See <log/>.
Note: Use left and right arrow keys to change values.
Prepend MAC Address
Enabled, Disabled
If enabled, the phone’s MAC address is prepended to the log message sent to the syslog server.

Polycom CX5500 Specifications

General

Field of View	360 degrees
Camera Resolution	1920 x 1080
Microphone Range	12 feet (3.6 meters)
Connectivity	USB
Audio Bandwidth	160 Hz to 22 kHz
Speaker	Built-in speaker
Compatibility	Microsoft Lync, Microsoft Skype for Business