Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 55
To find out the model number or part number of a product, see the section Product, Model, and Part
Number Mapping.
The following two examples illustrate the use of a variable substitution.
Example One
You can create a variable in the master configuration file that is replaced by the MAC address of each
phone when it reboots as shown in the figure MAC Address Variable.
MAC Address Variable
Example Two
You can direct phone update to a UC software build and configuration files based on the phone model
number and part number as shown in the figure Provisioning with Model and Part Numbers. All XML
attributes can be modified in this manner.
Provisioning with Model and Part Numbers
To Next Page
Loading...
