Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the
country code associated with your system.
Country Code Displays the country code associated with the
system location.
Set the Local Interface Language
Change the language that users see on the G7500 system local interface.
Procedure
1. In the system web interface, go to General Settings.
2. Select System Language and choose a language.
Configure Sleep Settings
Configure when you want your device to go to sleep after a period of inactivity. Sleep mode can help
prevent monitor burn-in.
Procedure
1. In the system web interface, go to General Settings > System Settings.
2. For Display, select whether you want to display a black screen or no signal message.
3. For Time Before System Goes to Sleep, select how long the device can be idle before it goes to
sleep.
4. Select the Enable Mic Mute in Sleep Mode check box to mute your microphones while the
system is asleep.
5. Select Save.
Related Links
Issues When the System is Sleeping or Waking on page 119
Configure General Audio Settings on page 69
Configure Camera Settings on page 79
Send Usage Data to Polycom
You can help Polycom improve its products and services by allowing the collection of usage data from
your G7500 system.
With your agreement, the system sends the following information to Polycom Cloud Services and the
Device Analytics service:
▪ Basic device information, including hardware and software versions
▪ Basic device configuration data
▪ Data and statistics related to device or feature usage
▪ Device health data, including CPU and memory usage
Configuring General Settings
Polycom, Inc. 23