EasyManuals Logo

Polycom G7500 Administrator's Guide

Polycom G7500
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
Configure Camera Settings
You can configure settings for cameras connected to your G7500 system. When you connect a supported
camera, the system automatically discovers it and displays the available camera settings in the system
web interface.
See the latest release notes for specific information about the cameras you can use with your G7500.
Note: If you connect an unsupported camera, the system still attempts to show video. Polycom
can’t guarantee that the results are optimal or that the available settings are the same as a
supported camera.
Procedure
1. In the system web interface, go to Audio/Video > Video Inputs.
2. Go to General Camera Settings.
3. Configure the following settings:
Setting Description
Allow Other Participants In a Call to Control
Your Camera
Specifies whether the far site can pan, tilt, or zoom
the near-site camera. When you enable this setting,
a user at the far site can control the framing and
angle of the camera for the best view of the near
site. This is also called Far End Camera Control
(FECC).
Power Frequency Specifies the power-line frequency for your system.
Your system typically defaults to the correct power-
line frequency based on the video standard used in
the country where it’s located. This setting helps
you adapt the system to areas where the frequency
doesn’t match the video standard. You might also
need to change this setting to avoid flicker from
fluorescent lights in the room.
Enable Camera Preset Snapshot Icons Enables the use of snapshot icons that represent
camera presets.
To see a preset icon, you must enable this setting
before configuring the preset.
Configuring Video and Camera Settings
Polycom, Inc. 79

Table of Contents

Other manuals for Polycom G7500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom G7500 and is the answer not in the manual?

Polycom G7500 Specifications

General IconGeneral
BluetoothBluetooth 5.0
Power Supply100-240V AC, 50/60 Hz
Audio FeaturesNoiseBlockAI, Acoustic Fence
Content SharingYes, wired and wireless
CameraPolycom EagleEye IV or EagleEye Cube
MicrophoneIntegrated beamforming microphone array
ConnectivityHDMI, USB, Bluetooth, Wi-Fi
Video Standards and ProtocolsH.264 AVC, H.265
Video InputHDMI
Video OutputHDMI
Audio StandardsG.711, G.722, G.722.1, G.729
Audio InputHDMI
Audio OutputHDMI
Network ProtocolsIPv4, IPv6
WirelessWi-Fi 802.11a/b/g/n/ac
Ethernet10/100/1000 Mbps
Resolution3840 x 2160
DisplayExternal display required
CompatibilityMicrosoft Teams, Zoom
Video ResolutionUp to 4K
Operating SystemPolycom RealPresence

Related product manuals