Polycom G7500 Administrator's Guide

Output Resolution Frame Rates (fps)
FHD 1920 × 1080p 50, 60
Supported HDMI Output Resolutions for Dual-Monitor Setups
Your G7500 system supports the following HDMI output resolutions and frame rates when using two
monitors.
Note: 4K resolution (3840 × 2160p) isn’t supported when you configure your system for dual
monitors. If you want to use 4K, set Monitor 2 to Off in the system web interface.
Supported HDMI Output Resolutions and Frame Rates for Dual-Monitor Setups
Output Resolution Frame Rates (fps)
FHD 1920 × 1080p 50, 60
Supported HDMI Input Resolutions
Your G7500 system supports the following monitor resolutions for HDMI input.
Supported HDMI Input Resolutions and Frame Rates
Input Resolution Frame Rates (fps)
UHD (4K) 3840 × 2160p 24, 25, 30
FHD 1920 × 1080p 50, 60
HD 1280 × 720p 50, 60
Configure Monitor Settings
You can optimize your G7500 system video output for single- and dual-monitor setups.
Interlaced modes aren’t supported.
Procedure
1. In the system web interface, go to Audio/Video > Monitors.
2. Configure the following settings (your changes save automatically):
Configuring Video and Camera Settings
Polycom, Inc. 77

Polycom G7500 Specifications

General

Bluetooth	Bluetooth 5.0
Power Supply	100-240V AC, 50/60 Hz
Audio Features	NoiseBlockAI, Acoustic Fence
Content Sharing	Yes, wired and wireless
Camera	Polycom EagleEye IV or EagleEye Cube
Microphone	Integrated beamforming microphone array
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Video Standards and Protocols	H.264 AVC, H.265
Video Input	HDMI
Video Output	HDMI
Audio Standards	G.711, G.722, G.722.1, G.729
Audio Input	HDMI
Audio Output	HDMI
Network Protocols	IPv4, IPv6
Wireless	Wi-Fi 802.11a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Resolution	3840 x 2160
Display	External display required
Compatibility	Microsoft Teams, Zoom
Video Resolution	Up to 4K
Operating System	Polycom RealPresence