Setting Description
Enable IP H.323 Enables the system to display H.323 settings and
configuration options.
Registration Status Read-only setting shows if your system is
registered with an H.323 gatekeeper.
H.323 Name How gatekeepers and gateways identify your
system. You can make point-to-point calls using H.
323 names if both systems are registered to a
gatekeeper.
The H.323 Name is the same as the device name
unless you change it.
Your organization’s dial plan might define the name
you can use.
H.323 Extension (E.164) You can place point-to-point calls using this
extension if both systems are registered with a
gatekeeper. Gatekeepers and gateways also use
the extension to identify your system.
Your organization’s dial plan might define the
extensions you can use.
Use Gatekeeper Specifies if you want to use a gatekeeper for H.323
services.
▪ Off: Calls don’t use a gatekeeper.
▪ Auto: System tries to automatically find an
available gatekeeper.
▪ Specify: Calls use the specified gatekeeper.
You must select this setting to enable H.235
Annex D Authentication.
If you don’t configure this setting to Off, a
registration status displays.
Require Authentication Enables support for H.235 Annex D Authentication.
When you enable H.235 Annex D Authentication,
the H.323 gatekeeper ensures that only trusted H.
323 endpoints can access the gatekeeper.
This setting is available when you set Use
Gatekeeper to Specify.
Username Specifies a user name if the gatekeeper requires
authentication for registration.
Password Specifies a password if the gatekeeper requires
authentication for registration.
Configuring Network Settings
Polycom, Inc. 35