n Do not throw batteries into fire or expose to high temperature.
Explosion hazard!
n Do not charge batteries. Explosion hazard!
n Battery fluid leaking due to wrong usage may cause skin irrita-
tion. Avoid contact with the battery fluid. In case of contact,
flush the battery fluid with large amounts of water. If the battery
fluid enters the eyes, flush immediately with water for 10 min.
and consult a physician without delay.
2.7 PAMIO safety devices
DANGER!
Malfunctioning safety devices may pose a fatal
risk!
Safety devices must be intact and properly inte-
grated into the control unit and the PAMIO compo-
nents configuration in order to guarantee safety.
n Before initial commissioning of the machine, ensure that all
safety devices are fully functional and correctly installed.
n Ensure that safety related inputs/outputs of the PAMIO compo-
nents and the CNC control unit are fully functional and perform
as intended.
n Never disable safety devices.
n Heed regulations concerning hardwiring of safety circuits.
External CNC machine
For information on required connections between
the PA PAMIO components and safety devices
integrated into the CNC machine see the docu-
mentation provided by the machine's manufacturer.
Safety connector
For information on the safety connector's purpose,
specification and wiring see
Ä
Chapter 4.5.8
“Safety Function” on page 81.
Safety
Hardware
PA 8000 PAMIO
Safety
12.01.2017 | 16
To Next Page
Loading...
Need help?
General
