2.9 Conduct in a dangerous situation and in
case of accidents
n Stay informed about locations of first aid equipment (first aid
kit, covers, etc.) and fire extinguishers at the site of installation.
n Instruct personnel about accident reporting, first aid and rescue
facilities at the site of installation.
n Disconnect power supply immediately.
n Initiate first aid measures.
n Inform responsible persons at the site.
n Call for rescue service if applicable.
2.10 Environmental protection
CAUTION!
Environmental hazard caused by incorrect han-
dling!
Incorrect handling of environmentally hazardous
substances, especially incorrect waste disposal,
can cause considerable damage to the environ-
ment.
The following environmentally hazardous components or sub-
stances are contained in the control unit:
Electronic components are considered special waste. They must
be properly disposed of.
Power Automation will accept the control unit to properly dispose of
its components upon decommissioning.
n Follow the standard return procedure, as described in
Ä
Chapter 6.3 “Return policy and procedure” on page 132.
Preventive Measures
In Case Of Accidents
Electronic Components
PA 8000 PAMIO
Safety
12.01.2017 | 19
To Next Page
Loading...
Need help?
General
