The power supply for encoders is connected with a 2 pole terminal
block (Fig. 46).
Fig. 46: RMS power terminal block
Pin Voltage Assignment
1 +5 V RMS supply
2 0 V RMS ground
Property Value Unit
Tolerance 0 - +20 %
The distance between the measuring systems and
the power supply can be relatively long. The resist-
ance of the power supply cable and the RMS' cur-
rent consumption generate a voltage drop (see
Ä
“Precondition” on page 70).
4.5.5 Axes Analog Outputs
Fig. 47: PAMIO 4ENC4A axes analog outputs
3 Analog outputs axes 1 to 4 (X37)
Connection
Pin Assignment
Technical data
Voltage Drop
Overview
PA 8000 PAMIO
PAMIO Components
12.01.2017 | 73
To Next Page
Loading...