2.11 Labels
NOTICE!
Readability Of Labels
Over the course of time labels may become dirty or
nonreadable for any other reason. Improper input
voltages applied due to readability of labels can
damage the control unit.
– Keep labels in readable condition at all times.
– Replace damaged labels (not including mate-
rial warranty seals).
– Replacements can be obtained from
Power Automation.
Fig. 1: PAMIO box labels
The following labels are attached on the back of each PAMIO
box:
Label - Overview
PA 8000 PAMIO
Safety
12.01.2017 | 20
To Next Page
Loading...