power automation PA 8000 - To 24 V Signal Converter

4.6.2.2 5V to 24V signal converter
The 5V to 24V converter is available as an option
from Power Automation (see Ä Chapter 6.1.1
“Service addresses” on page 130).
Ordering code for one set:
– PAMIO PWM CONV
The 5V to 24V signal converter module is intended to convert 5V
signals into 24V signals.
This converter has been developed especially for the PAMIO PWM
module, because the 24V output drivers of this module are not able
to switch at high frequencies.
Fig. 66: Signal Converter overview
1 Input Connector
2 Status LED
3 Power Supply Connector
4 Output Connector
Overview
PA 8000 PAMIO
PAMIO Components
12.01.2017 | 90